Acidizing/Fracing
Amine Plants
BOP/Accumulators/Closing
Buildings/Living Quarters
Casing/Casing Tools
Cementing Equipment
CO2 Plants
Coiled Tubing
Completion Systems/Tools
Compressors
Cranes
Drilling: Bits/Hole Openers
Drilling: Blocks/Hooks/Swivels
Drilling: Collars
Drilling: Drawworks/Brakes
Drilling: Drill Pipe
Drilling: Fluids And Muds
Drilling: Kelly/Bushing/Valves
Drilling: Masts/Substructures
Drilling: Mud Conditioning
Drilling: Mud Pumps/Fluid Ends
Drilling: Rigs
Drilling: Rot.Tables/Bushings/Slips
Drilling: SCR
Drilling: Stabilizers
Drilling: Subs
Drilling: Top Drives
Elevators
Engines
Fishing Tools
Flanges
Flowline
Generators
Hangers: Tubing/Casing
Heads: Tubing/Casing
Instrumentation
Line Pipe
Meters
Miscellaneous
Nitrogen
Offshore Equipment
Packers
Pipeline Equipment
Production Packers
Pumping Units/Artificial Lift
Pumps/Fluid Ends
Separators
Spool/DSA/Cross/T/Elbow/Swivel
Subsea Equipment
Tanks
Tongs
Transmissions
Tubing
Valves/Chokes/Actuators
Well Monitoring Equipment
Well Service/Workover
Well Test
Wellhead Equipment
Wireline
Xtree Assemblies
|
 |
| For Sale. New Nitrogen Generator 1,385,000euro | | Listing ID: 2122 | Vendor Stock No.: | | Price: 1,385,000euro | Date Posted: 07/08/10 | | Quantity: 1 | | Condition: new | | Location: Germany |
| | Description: | General Unit Description.
The unit is designed for following operating data:
21 m3/min = 740 cfm +/- 5% Nitrogen with 95% purity and a discharge pressure of 351 bara = 5000 psi
The unit will be driven by a diesel engine. Screw and piston compressors are directly coupled on one shaft-end of the prime mover for a synchronous output. An electric Generator is coupled on the second shaft end of the prime mover.
The compressor unit is installed in a container and suitable for heavy duty oil/gas-field operation. The control system of the unit will be fully-automatic for heavy duty operation.
The cooling system consists of three closed separate circuits. The screw-oil is cooled with a direct oil/air-heat exchanger. The compressor coolant (water with antifreeze) and the diesel-engine coolant (water with antifreeze) are cooled with one common coolant/air-heat exchanger each.
The ambient as well as the suction temperature will be in the range of -40°C +35°C. The operation of the compressor unit is allowed at temperatures inside the container above +2°C.
The unit is completely assembled on common base frame and will be tested under full load before shipment ex works.
The unit is designed, manufactured and tested in accordance with valid and applicable standards as DIN, VDI, VDE-ÖVE, IEC, ISO and QA-System which has been certified by DNV corresponding to ISO 9001. | | Seller: | | | Images: | 
|
|
|